RWRAPS T-60 Triple Output Switching Power Supply 60W AC 110V 220V DC T-60A T-60B T-60C T-60D 5V 12V 15V 24V -5V -12V Driver SMPS (Size : 100-120V, Color : T-60C 5V 15V -15V)

SETUP, RISE, HOLD TIME300ms, 50ms, 80ms/230VAC 800ms, 50ms,10ms/115VAC at full loadINPUTVOLTAGE RANGE85 ~ 132VAC/170 ~ 264VAC selected by switchFREQUENCY RANGE47 ~63HzEFFICIENCY(Typ.)72%72%AC CURRENT2A/115VAC,1A/230VACINRUSH CURRENT(max.)COLD START 30A/115VAC,60A/230VACLEAKAGE CURRENT<;3.5mA/240VACPROTECTIONOVER LOAD105 ~ 150% rated output powerProtection type : Hiccup mode, recovers automatically after fault condition is removedENVIRONMENTWORKING TEMP.-10 ~ +60"C (Refer to output load derating curve)WORKING HUMIDITY20 ~ 90% RH non-condensingSTORAGE TEMP., HUMIDITY-20 ~ +85"C, 10 ~ 95% RHTEMP. COEFFICIENT±0.03%/°C (0~ 50°C)on +5V outputVIBRATION10~500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axesSAFETY & EMC Note 4SAFETY STANDARDSUL1012 UL60950 TUV EN60950ApprovedWITHSTAND VOLTAGEIPOP:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVACISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDCEMI CONDUCTION & RADIATIONCompliance to EN55022 CISPR22 Class BHARMONIC CURRENTOTHERSMTBF281.1K hrs min. MIL-HDBK-217F (25°C)DIMENSION159*97*38mm (L*W*H)PACKING0.55Kg; 24pcs/14.1Kg/0.75CUFTNOTE1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2.Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pairwire terminated with a 01 uf 47uf parallel capacitor3Tolerance includes set up tolerance line regulation and load regulation4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

• Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
• Voltage consistency: There is no voltage fluctuations to speak of at power on, during transmit, receive, or at power off.
• It comes with built-in cooling fan and temperature detector.
• The power supply turns out to be small in size, featuring high stability, low ripple noise and low power consumption.
• Excellent in heat radiation Because of its design which can make it in a good condition when it is working.